Brooks CNC Routing - Photo Gallery

This was cut for a retired Marine friend. This can also be made into a clock. One of hundreds of 3D graphics from our 3D catalog.

The Deer Door as we call it. This is a cabinet door cut for one of our customers. The door received a lot of attention at the local Home Builders show. One of hundreds of 3D graphics from our 3D catalog.

Bulldog just after being carved. One of hundreds of 3D graphics from our 3D catalog.

Finished - Door with Bulldog Applique. One of hundreds of 3D graphics from our 3D catalog.

Unfinished - Just after carving. One of hundreds of 3D graphics from our 3D catalog.

The eagle is 26" wide by 10" high by 3/4" thick, cut in oak and stained in golden oak. One of hundreds of 3D graphics from our 3D catalog.

5" wide by 5 3/8" high by 3/4 " thick. Cut in oak, stained in golden oak. One of hundreds of 3D graphics from our 3D catalog.

Cutting the Leaf Man on the our CNC router. One of hundreds of 3D graphics from our 3D catalog.

Cut in oak, unfinished. Measures 5.5" wide by 10" tall by .73" thick. One of hundreds of 3D graphics from our 3D catalog.

Finished with Rosewood stain. Two coats of polyurethane. Cut in Oak. Measures 5.5" wide by 10" tall by .73" thick.

This shows just how thin the carving is.

Unfinished - LastSupper in Mahogany. One of hundreds of 3D graphics from our 3D catalog.

The clear ship case top was cut from 3/16" plexiglass. The ship was built by my wife's grandfather. The artwork on the wall was painted by my father-in-law.

This is the profile of some custom molding I did for a local cabinet shop before any hand finishing. The molding was cut in mahogany. Notice the detail.

This is two pieces of the custom molding cut in mahogany.

This is the larger of the molding cut into mahogany. The arch was cut into two pieces.